Sherco Automotive Supply
5431 NW 15 St  #9     Margate, FL 33063
800-548-6229(US)
    954-975-0012 
Fax 866-548-6229       954-975-0052
 

Products
Air Conditioning Supplies
Antennas
Automatic Transmission  Filter Kits
Automotive Chemicals
Battery Accessories
Body Fasteners
Boxed Assortments
Brass Fittings
Bulk Battery Cable
Cable Ties
Coil Tune-Up Kits
Copper Lugs
Crimp/Solder Battery Terminals
Drain Plugs And Gaskets
Dynatex Gasket Makers and Chemicals
Electrical Tape
Freeze 12 Refrigerant
Fuel Filters
Fuel Iine Hose
Fused Distribution Blocks
Fuses and Circuit Protection
Gauges
Headlamp Conversion Bulbs
Headlamps, Composite Bulbs
Headlamps, Xenon Super White
Heat Shrink Connectors
Heat Shrink Tubing
Heater Hose
Ignition
Installation Products
Klean Screens
Lathe Supplies and Parts
LED Bulbs
Lug Nuts
Marine Gauges
Mini Lamps
Motorcycle Products
Non-Insulated Terminals
Oil Filters
Polyvinyl Split Loom
Primary Wire
Raptor Audio
Raptor Battery Terminals
Relays
Rivets
Screws
Select-A-Pak Hardware
Shop Supplies
Solderless Terminals
Speakers
Starter Solenoid Contacts
Steel Brake Lines
Street Rod Products
Switches
Test & Tune Equiptment
Test Clips
Tire Changer and Brake
Tire Supplies
Undercar and Interior LED Lighting Kits 
Universal Cooling Fans
Universal Joints
Vacuum Hose
Weatherpack Connectors and Accessories
Windshield Wiper Product
 

 


FHP9600 Electronic Power Distribution Fuse Panel

On sale now @ $149.95        Order Now

  • The best low cost fuse panel available anywhere
  • Wire any car easily-trouble free
  • 200 ampere capability
  • 13 ATC/ATO Fuse positions
  • 26 fused power outlets
  • Easy on-off cover (No tools needed)
  • No terminals needed
  • Easy wire connections-no screws to back out or to tighten down
  • Fuse puller included in each panel
  • Compact size 5 " long, 3 " wide, 2" high
  • Booklet "How to Wire a Street Rod"


The FHP9600 electronic fuse panel is a universal panel for use with a standard headlight switch. It has one flasher to operate the hazard lamps, one to operate the turn signals and one bosch relay to operate the horns. Each fuse is connected to two or more output terminals for a total of 26 out put terminals.

The FHP9600 has three power feed posts: battery, run, and accessory .The lugless terminal outlets can accept wire up to 12 gauge and requires no terminals. To connect wires to panel, strip wire, push down the output terminal lever and insert the wire. There are no screws to tighten or to back out.

It mounts easily in almost any location due to its compact size. It takes up about one half the space as most popular fuse panels, also included with the panel is a diagram which includes wiring suggestions.
 

Auctions in Progress