What does White Shepherd fix?
White Shepherd Oil Stop Leak and conditioner is formulated to stop any oil fluid system leak and permanently seals: Power and Rack & Pinion Steering leaks, Manual and automatic transmissions, oil pan gaskets, front and rear main seals, differentials and hydraulic systems.
back to top
Can I reapply White Shepherd?
Yes. White Shepherd does not contain petroleum distillates, which can destroy seals after temporarily expanding them. It is safe to repeat treatment if other seals leak in the future.
back to top
How much do I use?
Use one 8 oz. bottle for systems holding up to 8 quarts of fluid. For systems that hold less that 3 quarts of fluid, use 1/3 bottle of White Shepherd.
back to top
How long does the repair take?
White Shepherd will seal most leaks within 1-2 hours while the car is being driven. Some more severe leaks can take up to 2 days drive time.
back to top
How large a leak does it repair?
White Shepherd will recondition any rubber seal that has a seeping or dripping leak.
back to top
How does it work?
White Shepherd Oil Stop Leak and conditioner is a unique plasticizer for all rubber seals. White Shepherd cleanses the seal of the varnish coat that builds up over time and then absorbs into the seal rejuvenating it to its original condition.
back to top
How long will the repair last?
White Shepherd will double the life of most seals.
back to top
Do I have to change my oil after
I apply White Shepherd?
NO. White Shepherd mixes with the oil and can stay in the system.
back to top
Can I use this in my brake system?
NO. White Shepherd is not intended for use in brake systems.
back to top
| 
| 1. |
Inspect system for obvious leaks. |
| 2. |
While engine or equipments to be repaired is off, pour 1 bottle (8 oz.) of White Shepherd into leaking component's oil sump, crank case, or fluid reservoir. Use one bottle for systems that hold up to 8 quarts of fluid. For systems holding less than 2 quarts of fluid use 1/3 bottle (i.e. power steering, transmissions).
|
| 3. |
Start engine or equipment and drive vehicle continuously for 1-2 hours until leak has stopped (for extreme leaks up
to 2 days drive time may be required). White Shepherd quickly revitalizes hard, shrunken, leaking seals,
to their original condition as it circulates throughout the system.
|
 |
DO NOT USE IN BRAKE SYSTEMS!
|
|
|
