Thin Wall Heat Shrink Tubing (NO Adhesive)
Available in:
- 12" long Cut Lengths (10 per bag).
- 48" long Cut Lengths (4 per bag).
- 100 or 50 ft Rolls.
- Stocked Colors: Black, Clear, Red, Blue, Green, White & Yellow.
- Standard Cut Lengths: Bulk, 100’ Spool, 50' Spool, 25' Spool,48", 12", and 6" Length.
- Pre-Shrink ID: 3/64", 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2", 3/4", 1", 1 1/2", 2", 3", 4".
Details:
- Applications include: electrical insulation of cable splices, wire harness.
- Covering, color coding, strain relief, wire marking and bundling.
- Made in the USA.
- Shrink Ratio: 2 to 1 Shrinks to half its orignal (round) diameter.
- A flexible, general purpose tubing for use where an adhesive seal is not needed.
- Flexible thin walled shrink tubingConforms well to irregular shapes.
- Provides insulation and strain relief for wire terminals.
- Available in a wide variety of colors for color-coding of electrical harnesses.
- Perfect for wire bundling.
- Self-extinguish (except clear).
- Excellent resistance to solvents, acids and alkalis.
- Good resistance to fuel and oil.
- General purpose heat shrinkable tubing.
- Single walled heat shrink.
- No adhesive lining.
- Flame Retardant.
- Specs: SAE-AMS-DTL-23053/5 Formerly, MIL-DTL-23053/5 Class 1 (Colors) Class 2 (Clear)
- UL: E39100 600V 125°C (257°F)
- CSA: LR38227 600V 125°C (257°F)
- Material: Polyolefin
- Shrink Temp.: 100°C (212°F)
- Recover Temp: 121°C
- Continuous Oper. Temp.: -55°C to 135°C (-67°F to 275°F)
- Flammability: Self-extinguish UL224 (except clear)
For More Information on Heat Shrink Tubing, check out these Informational Videos on Installation, Repair, And Specifications.
Available in:
- 12" long Cut Lengths (10 per bag).
- 48" long Cut Lengths (4 per bag).
- 100 or 50 ft Rolls.
- Stocked Colors: Black, Clear, Red, Blue, Green, White & Yellow.
- Standard Cut Lengths: Bulk, 100’ Spool, 50' Spool, 25' Spool,48", 12", and 6" Length.
- Pre-Shrink ID: 3/64", 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2", 3/4", 1", 1 1/2", 2", 3", 4".
Details:
- Applications include: electrical insulation of cable splices, wire harness.
- Covering, color coding, strain relief, wire marking and bundling.
- Made in the USA.
- Shrink Ratio: 2 to 1 Shrinks to half its orignal (round) diameter.
- A flexible, general purpose tubing for use where an adhesive seal is not needed.
- Flexible thin walled shrink tubingConforms well to irregular shapes.
- Provides insulation and strain relief for wire terminals.
- Available in a wide variety of colors for color-coding of electrical harnesses.
- Perfect for wire bundling.
- Self-extinguish (except clear).
- Excellent resistance to solvents, acids and alkalis.
- Good resistance to fuel and oil.
- General purpose heat shrinkable tubing.
- Single walled heat shrink.
- No adhesive lining.
- Flame Retardant.
- Specs: SAE-AMS-DTL-23053/5 Formerly, MIL-DTL-23053/5 Class 1 (Colors) Class 2 (Clear)
- UL: E39100 600V 125°C (257°F)
- CSA: LR38227 600V 125°C (257°F)
- Material: Polyolefin
- Shrink Temp.: 100°C (212°F)
- Recover Temp: 121°C
- Continuous Oper. Temp.: -55°C to 135°C (-67°F to 275°F)
- Flammability: Self-extinguish UL224 (except clear)